Documented model profile
AlorAir Sentinel HDi120
A larger pump-equipped Sentinel model whose catalog lists 120 pints per day at AHAM and 235 pints at saturation. The manufacturer describes ductable use, but the appropriate kit and rated installation conditions still need verification.
Model HDi120 · Current product-page model with R32 specification PDF dated in filename 20251219; exact delivered production SKU must be checked
Checked Oct 11, 2026 · current
Check the essentials.
- Extraction rating & conditions
- 120 pints/day80°F / 60% RH · Manufacturer AHAM label93 pints/day73°F / 60% RH · Manufacturer DOE label235 pints/dayTest conditions not verified
- Drain arrangement
- built in pumpPump and/or gravity mode as stated in the named product specification; mode and hose setup must be checked in the exact manual.
- Cabinet height
- 17.9 in.Manufacturer product specification; not independently measured.
- Cabinet width
- 14.7 in.Manufacturer product specification; not independently measured.
- Cabinet depth
- 23.8 in.Manufacturer product specification; not independently measured.
- Minimum inlet-air temperature
- 33.8°FManufacturer product specification; not independently measured.
- Power at published conditions
- Not verifiedNot confirmed in the checked sources.
- Noise measurement
- 60 dBAManufacturer scalar claim, with measurement distance/conditions unspecified. Inequality claims for other models are left null.
- Duct connection
- YesR32 specification explicitly supports ducting to an HVAC system with optional mounting flanges; installation design and the exact kit remain separate checks.
Cabinet dimensions do not include airflow or service clearance. Follow the exact model manual. Check the source documents ↓
Where it may fit
- Comparing dedicated pump-equipped units for a sealed crawl space or basement.
Before you buy
- Confirm the exact current SKU, refrigerant generation and matching installation manual.
- Verify access clearance and the complete condensate-discharge route before ordering.
The tradeoffs
- Current R32 specification lists different capacity points for 80°F/60% RH and 73°F/60% RH; compare equal conditions. Check duct collars, air path and pump discharge requirements separately.
Reviews & installation evidence
Independent evidence is still being collected.
Manufacturer product-page and linked-document analysis checked 2026-10-11; no independent testing of performance, sound or reliability is claimed.
We will add concise summaries of relevant tests, installations and owner experience, with links and limitations.
Follow the evidence
Sources & further reading
Open the original material for the full context. A product specification is not an independent test.
- manufacturer productAlorAir crawl-space, basement and whole-house catalog
AlorAir · Checked Oct 11, 2026
Product-navigation and catalog sections: Crawl Space & Basement Dehumidifiers and Whole House Dehumidifiers. Capacity, drainage and dimensions per named model.Catalog navigation is reused on individual product pages. Some width/depth labels disagree with individual specification tables; no automatic reconciliation. Color variants and duplicate HDi90 ductable listing were excluded.
- manufacturer productAlorAir Sentinel HDi120 manufacturer product page
AlorAir · Checked Oct 11, 2026
Named model catalog card gives 120 PPD AHAM, 235 saturation and pump drainage; Application explicitly describes duct-able use; individual Specifications LxWxH and temperature.Exact production part/SKU and manual revision not confirmed; recorded product-page model identity only. Manufacturer specifications are not independent test results.
- manufacturer specAlorAir Sentinel HDi120 current linked specification sheet
AlorAir · Checked Oct 11, 2026
Version: Current product-page-linked PDF; filename revision 20251219Manufacturer specification table and application/ducting panel; compare with the exact product page and delivered model plate.Primary specification downloaded and checked. Filename date is a document identifier, not a verified publication date. Conflicting dimensions, generations and capacity conditions are retained in model notes.