DehumidifierMatchFind my match ↗

Documented model profile

AlorAir Sentinel HDi90

A pump-drained unit with a stated 90-pint capacity at 80°F and 60% RH. It is taller than the smaller Sentinel models, so installation clearance matters alongside its moisture-removal rating.

Model HDi90 · Current product-page model; R32 specification PDF filename revision 20250917; exact production SKU unconfirmed
Checked Oct 11, 2026 · current

AlorAir Sentinel HDi90 — manufacturer product photograph

Product photograph: AlorAir ↗

Check the essentials.

Extraction rating & conditions
90 pints/day80°F / 60% RH · AHAM
198 pints/dayTest conditions not verified
Drain arrangement
built in pumpPump and/or gravity mode as stated in the named product specification; mode and hose setup must be checked in the exact manual.
Cabinet height
17.7 in.Current R32 PDF labels dimensions L × W × H; product navigation swaps the horizontal labels. PDF case dimensions are used, excluding required installation clearances.
Cabinet width
15.2 in.Current R32 PDF labels dimensions L × W × H; product navigation swaps the horizontal labels. PDF case dimensions are used, excluding required installation clearances.
Cabinet depth
23.2 in.Current R32 PDF labels dimensions L × W × H; product navigation swaps the horizontal labels. PDF case dimensions are used, excluding required installation clearances.
Minimum inlet-air temperature
33.8°FManufacturer product specification; not independently measured.
Power at published conditions
Not verifiedNot confirmed in the checked sources.
Noise measurement
Not verifiedNot confirmed in the checked sources.
Duct connection
YesThe linked exact-model manufacturer specification explicitly describes optional duct mounting and a ducted installation. Confirm the matching collar kit and installed airflow requirements.

Cabinet dimensions do not include airflow or service clearance. Follow the exact model manual. Check the source documents ↓

Where it may fit

  • Comparing dedicated pump-equipped units for a sealed crawl space or basement.

Before you buy

  • Confirm the exact current SKU, refrigerant generation and matching installation manual.
  • Verify access clearance and the complete condensate-discharge route before ordering.

The tradeoffs

  • The product navigation swaps horizontal dimension labels; this record uses the L × W × H order explicitly labeled in the current R32 specification. Add collar, hose and service space before deciding fit.

Reviews & installation evidence

Independent evidence is still being collected.

Manufacturer product-page and linked-document analysis checked 2026-10-11; no independent testing of performance, sound or reliability is claimed.

We will add concise summaries of relevant tests, installations and owner experience, with links and limitations.

Follow the evidence

Sources & further reading

Open the original material for the full context. A product specification is not an independent test.

  1. manufacturer productAlorAir crawl-space, basement and whole-house catalog

    AlorAir · Checked Oct 11, 2026

    Product-navigation and catalog sections: Crawl Space & Basement Dehumidifiers and Whole House Dehumidifiers. Capacity, drainage and dimensions per named model.

    Catalog navigation is reused on individual product pages. Some width/depth labels disagree with individual specification tables; no automatic reconciliation. Color variants and duplicate HDi90 ductable listing were excluded.

  2. manufacturer productAlorAir Sentinel HDi90 manufacturer product page

    AlorAir · Checked Oct 11, 2026

    Product overview explicitly gives 23.2 in D x 15.2 in W x 17.7 in H; Specifications gives pump drainage, 90 pints at 80°F/60%. Applications list crawl spaces and basements.

    Exact production part/SKU and manual revision not confirmed; recorded product-page model identity only. Manufacturer specifications are not independent test results.

  3. manufacturer specAlorAir Sentinel HDi90 current linked specification sheet

    AlorAir · Checked Oct 11, 2026

    Version: Current product-page-linked PDF; filename revision 20250917Manufacturer specification table and application/ducting panel; compare with the exact product page and delivered model plate.

    Primary specification downloaded and checked. Filename date is a document identifier, not a verified publication date. Conflicting dimensions, generations and capacity conditions are retained in model notes.