Documented model profile

AprilAire E080

A documented 80-pint option at 80°F / 60% RH, with duct support and gravity drainage. Its 15-inch cabinet excludes feet and duct collars.

Model E080 · Base E080; current manufacturer page
Checked Oct 11, 2026 · current

aprilaireE080Product photo pending

Check the essentials.

Extraction rating & conditions
80 pints/day80°F / 60% RH
65 pints/day73°F / 60% RH
Drain arrangement
gravity
Cabinet height
15 in.Rounded cabinet dimensions exclude feet, filter doors and duct collars. Check the drawing and installed envelope.
Cabinet width
14 in.Rounded cabinet dimensions exclude feet, filter doors and duct collars. Check the drawing and installed envelope.
Cabinet depth
26 in.Rounded cabinet dimensions exclude feet, filter doors and duct collars. Check the drawing and installed envelope.
Minimum inlet-air temperature
Not verified
Power at published conditions
Not verifiedNot verified.
Noise measurement
Not verifiedComparable independent noise measurements have not been verified.
Duct connection
YesDuct configuration and required accessories must follow the installation manual.

Cabinet dimensions do not include airflow or service clearance. Follow the exact model manual. Check the source documents ↓

Where it may fit

  • A crawl space installation with a verified drainage and airflow plan.
  • A basement installation with a verified drainage and airflow plan.
  • A whole home installation with a verified drainage and airflow plan.

Before you buy

  • Confirm the base model rather than a pump or refrigerant variant.
  • Plan a continuous downhill drain and check the manual for service clearance.
  • Allow 15 inches for filter access on either side per combined manual 10020792B 02.24.
  • Buy the base plug variant; hardwired, caster and Wi-Fi bundles are distinct listings.

The tradeoffs

  • The listed 80-pint capacity is not directly comparable to a different test standard.
  • Dealer installation and accessories can affect the total cost.

Reviews & installation evidence

Independent evidence is still being collected.

This is a source-based specification profile. We have not independently tested this unit or confirmed long-term reliability.

We will add concise summaries of relevant tests, installations and owner experience, with links and limitations.

Follow the evidence

Sources & further reading

Open the original material for the full context. A product specification is not an independent test.

  1. manufacturer manualAprilAire E080 & E100 Installation & Owner Manual 02.24

    AprilAire; manufacturer PDF hosted by Sylvane · Checked Oct 11, 2026

    Version: 10020792B, 02.24PDF p2 specifications, p8 Figs12-13, p9 Fig15

    Exact E080/E100 family coverage, but serial-specific revisions must be checked with delivered unit. This newer combined installation/owner manual supersedes the separate 2021 installation PDFs still linked by retailer.

  2. official guidanceAprilAire FAQ: E-Series dehumidifier drain trap requirement

    AprilAire · Checked Oct 11, 2026

    Version: Live FAQ checked 2026-10-11Dehumidifier FAQ: Do AprilAire Dehumidifiers (Models E070, E080, E100, and E130) require a drain trap?

    Unit design statement, not a claim about local plumbing rules or every site installation.

  3. manufacturer specAprilAire E080 Specification Form 961 03.24

    AprilAire; manufacturer PDF hosted by Sylvane · Checked Oct 11, 2026

    Version: Form 961, 320713, 03.24PDF p1 table and dimension footnote 3; p2 installation options

    Cabinet table uses rounded dimensions; diagram has detailed callouts. Rated capacity/current at 0 ESP. No claim that nominal height equals installed height.

  4. manufacturer productE080 product details

    AprilAire · Checked Oct 11, 2026

    Product details and specification: base E080, dimensions, included duct collars and gravity drain setup.

    Capacity conditions are not identified here. Do not assume the 80-pint figure uses the same test conditions as another brand.